Oil the terrace – how to, step by step
Your terrace is there to be used! Oil it regularly, and it will not only stay barefoot-friendly, but also be resistant to the elements. Our step-by-step guide will help you work efficiently and achieve sustainable results.
-
Steg 1/4 Prep work
-
Steg 2/4 Wash the terrace
Produkter i användning
-
Steg 3/4 Sand the terrace
Produkter i användning
-
Steg 4/4 Treat the terrace
Produkter i användning
Step by Step
-
1
Prep work
Protect sensitive surfaces
Cover house foundations, plants and other sensitive surfaces with plastic sheeting to protect against terrace detergent. Some detergents can affect glass and aluminum and affect other sensitive surfaces.
The next step is to wash the terrace.
-
2
Wash the terrace
Rinse with water
Thoroughly rinse the terrace with water. Do you use pressure washing?
Be careful not to hold the nozzle too close to the wood. The surface can be damaged if the pressure is too high.Wash away dirt
Spread terrace detergent evenly over the wet wood. The procedure may be different, so check which tool recommended by the manufacturer on the packaging. Then scrub off any dirt and old oil with a terrace scrubbing brush.
Rinse and let dry
Rinse with water and let the wood dry thoroughly. Then it’s time to sand.
-
3
Sand the terrace
Sand away all irregularities
Attach the sanding paper to the sanding plate of the terrace tool. Sand away sharp edges, knots and irregularities. There are different grits of sanding paper and for the terrace 120 grit is usually adequate. Use a sanding cork for edges and smaller surfaces.
Attach the terrace tool to an extension pole to save power and improve reach.
Polish and brush
Go over the surface once more time to make the wood extra barefoot-friendly. Finish by brushing away all sanding dust. In the next step, it is time to add oil.
-
4
Treat the terrace
Pour oil and attach the application pad
Pour the oil into a tray to make the work easier. Remove the sanding plate and attach the application pad to the terrace tool.
Dip the terrace pad in the oil and lightly squeeze out the excess oil. Then stroke in the same direction as the grain of the wood. Our Terrace application pad helps you work faster and gives an even, thin coat without overlap marks.
Complete with a brush
Complete with a wood care brush in crevices and on hard-to-reach details. Remember to finish a few boards at a time for best results.
Done! Now you have a barefoot-friendly terrace that stands up well to the elements.
